Review Wheeler Barrel Vise with 3 Oak Bushings 465185 Pros

Price Save 26% from $100.24 to $73.79

Our store offers Wheeler Barrel Vise with 3 Oak Bushings 465185 at a discount price. We are an Authorized US Distributor for Wheeler Gunsmithing Supplies. All Gunsmithing Supplies by Wheeler Engineering from our online store comes with Full Manufacturer Warranty.

The Barrel Vise provides plenty of holding force to securely clamp your barrel for removal or installation. The Vise includes two pre-drilled oak block sets 1.75", and a solid oak block for custom drilling.

A full line of Wheeler Gunsmithing Supplies are also available from our store. For a complete selection of products by Wheeler Engineering on sale please visit Wheeler Engineering page on our website. For more brand name Gunsmithing Supplies please visit our Gunsmithing Supplies store section.

Package Contents:

  • Wheeler Barrel Vise with 3 Oak Bushings 465185

Wheeler Barrel Vise with 3 Oak Bushings 465185 and other products by Wheeler Engineering belong to Battenfeld Technologies family. All the brands by Battenfeld - Wheeler Engineering, Wheeler Engineering, Wheeler Engineering, Wheeler Engineering, Wheeler Engineering, Wheeler Engineering - are on sale and available from our on-line store. Battenfeld Technologies features such products as Gunsmith and Reloading Equipment, Hearing Protection, Gun Cleaning Kits, Shooting Glasses, Shooting Gloves, and other Shooting Accessories


RATING
87.25 /100
  • Design

    Excellent

  • Performance

    Excellent

  • Value for money

    Excellent

  • Feature

    Excellent

Features of Wheeler Barrel Vise with 3 Oak Bushings 465185:

  • constructed of thick steel
  • one inch thick
  • fifteen inch long carbon steel alloy handle
  • black oxide finish
  • fully supports the receiver ring

1-Wheeler Barrel Vise with 3 Oak Bushings 465185

  • PROS
  • Beefy, well made
  • easy to use
  • does the job
  • no problems
  • CONS
  • Oak bushings
#Wheeler Engineering

Enjoyed this article? Stay informed by joining our newsletter!

Comments
Ari - Add Reply

I have used pipe vises to take off barrels in the past. With this bad boy it's much easier to put the clamp on. Get a rosin bag from a sports store, cut it open and use that on the blocks. That works every time. Pros: heavy duty Cons: none, could be chrome and be engraved for $20 more

You must be logged in to post a comment.
Barry - Add Reply

Swapped out my .308 barrel on my savage 10 bat with a criterion 6.5 creedmore varmit barrel, vise did what it was suppose to do. You have to really crank down on to it for it to hold the barrel sufficiently, I didn't have any rosin, like some people used, but it worked fine anyway. I added washers under the nuts on the top plate so there wouldn't be any gawling. Just clamped the vise to my bench with 'c' clamps and it was good enough to hold it tightly. Would have given it 5 stars if it had better bushings, but the oak bushings will work fine for me, I won't be replacing barrels frequently. All in all I am happy with this vise.

You must be logged in to post a comment.
Jeremie - Add Reply

Meets all my expectations, works great. Pros: Easy to use and set up

You must be logged in to post a comment.
Buck - Add Reply

JUST GREAT DOES THE JOB WELL Pros: really heavy Cons: none

You must be logged in to post a comment.
Antwan - Add Reply

The only thing negative I have to say is there is a small crack already in one of my oak blocks. Still was able to remove one barrel from action and put another barrel back on. Overall I’m pleased and look forward to using it more In the future.

You must be logged in to post a comment.
Eugene - Add Reply

i found it works better with a little rosin on the blocks to help keep barrel from spinning. rosin will help grab the barrel better. good item! Pros: works good Cons: bulky?

You must be logged in to post a comment.
Ransom - Add Reply

I use this to remove screwed in barrels such as a Ruger 77/357, 77/44. It worked as advertised and I have no issues or nitpicks. It comes with a back of resin to help hold the barrel. It is worth the money in my opinion.

You must be logged in to post a comment.
Stanton - Add Reply

Be sure to tighten the nuts evenly a little at a time. Works great! Cant beat the price!

You must be logged in to post a comment.
Gideon - Add Reply

I had a barrel glued on an older model 700. I broke the oak blocks on my homemade vice. After several unsuccessful attempts to clamp barrel, I finally gave in and purchased this vise to do the job. It worked perfectly.

You must be logged in to post a comment.

You must be logged in to post a comment.

Related Articles